-
WS-5 SF6 Optical Gas Imaging Leakmeter
The WS-5 is an optical gas imaging camera that visualizes and pinpoints SF6 and other gas emissions without the need to shut down operations. This portable, non-contact system allows you to quickly scan wide areas for leaks, so you can begin repairs sooner. Sulfur Hexafluoride (SF6 ) is used in the electric power industry as an insulator and quenching medium for gas-insulated substations and circuit breakers.
These facilities have thousands of connections and fittings that need regular inspection, but more than 80% of a gas leaks occur in less than 1% of those components. As a result, crews spend more than 99% of their time inspecting safe, non-leaking parts.
-
LK500 SF6 Gas Vibrating Imaging Leakmeter
LK500 SF6 Gas Vibrating Imaging Leakmeter is the introduction of German technology, the first use of SF6 gas vibration imaging technique in the world, that is, Photo-acoustic Spectroscopy, carried out to find the leakage point and positioning of instruments and equipment! The LK500 SF6 Gas Vibrating Imaging Leakmeter has a high sensitivity to detect 1 × 10-6 scc / sec, without the background to detect the characteristics of imaging.
-
LK302 Extra High Sensitivity SF6 Leakmeter
The LK302 Extra High Sensitivity SF6 Leakmeter is a highly accurate, reliable and stable quantitative gas monitoring system. The applied technology is based on of photo-acoustic infrared spectroscopy. This physical and non-destructive working principle implies that the LK302 Extra High Sensitivity SF6 Leakmeter -compared to other detectors- achieves highest accuracy due to the integrated temperature and pressure compensation while measuring LK302 Extra High Sensitivity SF6 Leakmeter down to 5ppbv. Water vapor interference can be excluded through the installed acquisition and crosscompensation of the moisture content while customers can choose for compensations of further VOCs being present that might interfere the measurement’s preciseness. The reliability and accuracy of measurement results is ensured by regular self tests of the system. Due to the physical working principle the LK302 Extra High Sensitivity SF6 Leakmeter requires no consumables and beyond that very low maintenance. Re-calibration is recommended once a year and can be executed by the operator.
-
LK08 Portable Refrigerant SF6 Leak Detector
The LK08 is a rugged, completely portable gas leak detector which will detect refrigerant, sulphur hexafluoride and other halogenated gases down to 2.83g per year. It is an essential tool for all refrigeration, heating and ventilation engineers employed in the installation and service industries. The detector relies on the property of halogenated gases to reduce the current produced in a corona discharge at the sensor. The current change is detected and presented as an increase in frequency of an audible alarm. The higher the frequency, the greater the concentration of halogen detected.The unit is supplied complete with its own battery supply and requires no other electrical or gas services. Also supplied with the equipment is a check leak which will test the sensitivity ofthe equipment in service. The instrument is ready for use immediately it is switched on and will not be adversely affected by large concentrations of halogenated gases in the atmosphere.
-
LK300A High Sensitivity SF6 Leakmeter
The LK300A High Sensitivity SF6 Leakmeter was particularly developed to pinpoint smallest leaks of SF6. With its fast response time and clear down after saturation the LK300A High Sensitivity SF6 Leakmeter is an ideal tool to reduce environmental unfriendly and costly SF6-emissions.
-
LK300 High Sensitivity SF6 Leakmeter
The LK300 High Sensitivity SF6 Leakmeter was particularly developed to pinpoint smallest leaks of SF6. With its fast response time and clear down after saturation the LK300 High Sensitivity SF6 Leakmeter is an ideal tool to reduce environmental unfriendly and costly SF6-emissions.
-
LK301 Portable SF6 Leakmeter
The LK301 Portable SF6 Leakmeter is a rugged, completely portable gas leak detector which use the measurement principle of Micro Electron Capture Detector(MECD). All readings are displayed real-time on the touch-screen display, in parts per million volume (ppmV).
-
LK303 SF6 On Line Leakmeter system
LK303 On Line Leakmeter system is based on the current power system to further improve production safety requirements, for the staff to provide the physical protection of health and safety which in the room installed SF6 distribution equipment, and the design, development of intelligent online detection system.
System is mainly detected in ambient air, the SF6 gas’ content and oxygen content, when the SF6 gas content exceed standard or the lack of oxygen in the environment,the system can real-time alarm, and automatically open to the ventilation fan and have the temperature and humidity testing, the work of the state of voice prompts, Far EasTone alarm, historical data query and many other rich features.
System uses the latest DNIR infrared sensor technology to real-time measurement of the concentration of SF6. Can be achieved not only the purpose of protection of personal safety, but also to ensure the normal operation of equipment; high stability of oxygen sensors for on-site staff to provide more reliable protection layer.
The system can be widely used in a variety of voltage levels of SF6 switch rooms, switchgear rooms (GIS Room), SF6 main transformer room.
